How to Take Ring Doorbell off to Charge

Angel K. Vanleuven

To take your Ring Doorbell off to charge, simply unscrew the faceplate from the backplate. Then, twist the backplate counterclockwise and pull it away from the mounting bracket. From there, you can unplug the battery and plug in your micro USB charger.

  • Remove the faceplate of the ring doorbell by unscrewing the two screws that hold it in place
  • Unscrew the four screws that hold the ring doorbell to the mounting plate
  • Carefully remove the ring doorbell from the mounting plate, taking care not to damage or lose any of the small parts like washers and springs
  • Flip over the ring doorbell and locate the charging port on the backside
  • Plug in your micro USB charger to the charging port and allow your ring doorbell to charge for a few hours before reattaching it to its mount

Do You Have to Take Your Ring Doorbell off to Charge It?

No, you don’t have to take your ring doorbell off to charge it. There is a built-in battery that can be charged using the included micro USB cable.

How Do I Open My Ring Doorbell to Change the Battery?

If you’re like most people, your home is your castle. And, just like any castle, it needs to be well-fortified against invaders. That’s why you have a doorbell.

But what happens when your doorbell stops working? More specifically, what do you do when the battery dies and you need to change it? Luckily, changing the battery in your ring doorbell is a relatively easy process that anyone can do.

Here’s what you need to know: 1. Start by removing the faceplate from your ring doorbell. There are typically two screws holding it in place; remove these with a screwdriver.

2. With the faceplate removed, you should now see the back of the ring doorbell itself. There will be a small tab or lever that releases the battery compartment; press or slide this and then open up the compartment. 3. Take out the old battery and insert a new one in its place; make sure that the positive and negative terminals are properly aligned before doing so.

Close up the battery compartment and reattach the faceplate using the screws you removed earlier. And that’s it! You’ve now successfully changed the battery in your ring doorbell and it should be good as new.

How to charge Ring video doorbell

How to Charge Ring Doorbell 2

If you have the Ring Doorbell 2, you know that it’s a great way to keep an eye on your home. But one thing that can be a little tricky is knowing how to charge it. Here are some tips on how to charge your Ring Doorbell 2 so that it stays working well.

First, make sure that you have the right power adapter for your Ring Doorbell 2. The wrong adapter can damage your doorbell, so it’s important to get this right. You can find the right adapter by checking the label on the back of your doorbell or in the manual that came with it.

Once you have the right adapter, plug it into a power outlet and then connect the other end to your doorbell. Once it’s plugged in, you should see a green light on the front of your doorbell indicating that it’s charging. It usually takes about 4-5 hours for a full charge, so if you know you won’t be using your doorbell for a while, it’s best to charge it up before hand.

That way you’ll always have a full battery when you need it. Follow these simple tips and you’ll never have to worry about running out of juice for your Ring Doorbell 2 again!

How to Charge Ring Doorbell 1

If you’re like most people, you probably don’t think too much about how to charge your Ring Doorbell 1. But if you’re having trouble with it, there are a few things you can try. First, make sure that the batteries are properly seated in the doorbell.

If they’re not, they may not be making good contact and won’t charge properly. Next, check the charging port on the back of the doorbell. If it’s dirty or damaged, it may not be able to connect with the charger correctly.

Try cleaning it with a cotton swab or replacing it if necessary. Finally, if all else fails, you can always try resetting your doorbell by pressing and holding the reset button for 30 seconds. This will clear any errors and hopefully get your doorbell charging again correctly.

Charging Ring Doorbell

If you have a Ring Doorbell, you know that it needs to be charged regularly in order to stay operational. But what does that process entail? Read on to find out everything you need to know about charging your Ring Doorbell!

The first thing you need to do is locate the charging port on the back of the doorbell. It will be next to the battery cover. Once you’ve found it, insert the micro USB cable into the port and then plug the other end into a power source.

We recommend using an adapter that plugs into a wall outlet, but you can also use a computer or laptop if necessary. Once plugged in, it can take up to four hours for the Ring Doorbell to fully charge. You’ll know it’s done when the LED light on the front of the device turns green.

Once it’s fully charged, unplug it from the power source and reattach the battery cover. And that’s all there is to it! Now you know how to charge your Ring Doorbell so that it stays operational at all times.

How to Remove Battery from Ring Doorbell 2

If you need to remove the battery from your Ring Doorbell 2, here’s how: 1. Remove the faceplate by unscrewing the two screws on the bottom of the doorbell. 2. With the faceplate removed, locate the small black tab near the top of the battery compartment and press it in to release the battery.

3. Pull out the old battery and insert a new one, making sure that the positive (+) side is facing up. 4. Replace the faceplate and screw it back into place.


If your Ring Doorbell is not holding a charge, you may need to take it off the door to charge it. To do this, follow these steps: 1. Remove the faceplate of the Ring Doorbell by removing the two screws that hold it in place.

2. Use a small flathead screwdriver to remove the battery cover by prying it off. 3. Take out the battery and plug in the micro USB charging cable into the port on the back of the Ring Doorbell. 4. Plug the other end of the charging cable into a power outlet or USB port on your computer.

5. Leave your Ring Doorbell plugged in until it has a full charge (this could take up to several hours). 6. Once fully charged, reattach the battery cover and faceplate, then screw them both back into place.

Leave a Comment