How to Get Ring Doorbell Cover off

If you need to get the cover off your Ring Doorbell, there are a few things you can try. First, try simply pulling the cover off. If that doesn’t work, you can try using a flathead screwdriver to gently pry the cover off.

If neither of those work, you may need to use a drill to remove the screws that are holding the cover on.

  • Open the battery compartment of your Ring Doorbell and remove the batteries
  • Unscrew the cover plate from the back of the unit
  • Use a small flathead screwdriver to pry off the rubber ring around the doorbell button
  • The cover should now come off easily
  • If it does not, check to see if there are any other screws holding it in place
How to Get Ring Doorbell Cover off


How Do I Get My Ring Doorbell Cover off Without Tools?

If you’re like most people, your Ring doorbell came with a plastic cover that protects the face of the device. Over time, this cover can become scratched or cracked, and it may need to be replaced. The good news is that you don’t need any special tools to remove the old cover and install a new one.

To remove the ring doorbell cover: 1. Start by removing the two screws that hold the faceplate in place. These are located at the top and bottom of the doorbell.

2. Once the screws are removed, gently pull off the faceplate to reveal the back of the doorbell. 3. There are four small clips that hold the ring onto the backplate. Use a flathead screwdriver or other thin tool to release these clips (you may have to wiggle them back and forth a bit).

With all four clips released, you should be able to simply pull off the old ring. 4. Take your new ring and align it with the backplate so that all four holes line up. Push down on each side until you hear a “click” as each clip locks into place.

How Do You Remove the Faceplate from a Ring Doorbell Pro?

Assuming you would like tips on how to remove the faceplate from a Ring Doorbell Pro: 1. Use a small, flathead screwdriver to remove the two screws at the top of the doorbell. 2. Gently pull down on the faceplate to release it from the bottom tab.

3. Once the faceplate is loose, wiggle it side-to-side until it comes off completely. 4. If you’re having trouble removing the faceplate, try using a spudger tool or your fingers to carefully pry it off.

Do I Take Plastic Cover off of Ring Doorbell?

Most people don’t realize that their Ring doorbells come with a plastic cover already installed. This is to protect the doorbell from damage during shipping and installation. Once you have your Ring doorbell installed, you can remove this plastic cover.

There is no need to keep it on, and it can actually make it more difficult to use your doorbell if it’s in the way.

What Screwdriver Do I Need to Open a Ring Doorbell?

There are many different types of doorbells on the market, and each one requires a different type of screwdriver to open it. The most common type of doorbell is the push-button doorbell, which requires a small flathead screwdriver to open. Other types of doorbells, such as the ring doorbell, may require a Phillips head screwdriver or even a special key.

If you’re not sure what type of screwdriver you need to open your particular doorbell, consult the owner’s manual or look for online instructions specific to your model.

How to Remove Ring Doorbell Wired Cover

If you have a Ring Doorbell and want to remove the wired cover, this is how you do it. To start, unscrew the two screws that hold the cover in place. Once the screws are removed, slide the cover off of the doorbell.

If there is any adhesive residue left behind, you can use a putty knife or other sharp object to scrape it off. Now that the cover is off, you should see four wires coming from the doorbell – two black and two white. These are your power wires.

Carefully disconnect them from the terminals on the back of the doorbell (one wire per terminal). Once the power wires are disconnected, you can remove the entire doorbell unit from its mount. There will be two more screws holding it in place – remove these as well.

With those screws out, you should be able to pull the doorbell away from its mount and access the battery compartment. Inside of the battery compartment, there will be a small metal tab holding down one of the batteries. Use a flathead screwdriver or another similar tool to pry up on this tab and release it.

Then, simply pull out both batteries and dispose of them properly. With your Ring Doorbell now unplugged and without batteries, it’s safe to proceed with removing any additional wiring if needed. To do this, locate where your wiring comes into contact with yourRing Doorbelland unscrew any connection points holding it in place (there may just be one).


If you’re having trouble getting your Ring Doorbell cover off, don’t worry – it’s a common problem. There are a few simple tricks you can try to get it off without damaging the doorbell. First, try using a flathead screwdriver to pry the cover off.

If that doesn’t work, you can try heating up the cover with a hair dryer or heat gun. Once the cover is hot, it should come off easily. If all else fails, you can always contact Ring customer support for help.

Leave a Comment