Do I Need Jumper Cable for Ring Doorbell

You do not need jumper cables for Ring Doorbell. The device has a built-in battery that will last for several months before needing to be recharged. If your home has an existing doorbell system, you can use the existing wires and transformers to power Ring Doorbell. However, Bypassing the chime coil with the Ring Doorbell jumper cable kit will provide you Ring Doorbell with enough power to operate. Your old doorbell, however, won’t ring anymore as a result of this.

How to Install Ring Doorbell Wired | Ring

If you live in an area where it gets cold, you may be wondering if you need to get jumper cables for your Ring Doorbell. The answer is yes! If your Doorbell is exposed to temperatures below freezing, the battery can die and you will not be able to use your Doorbell until it warms up.

To avoid this, we recommend getting jumper cables for your Doorbell so that you can keep using it even in the coldest weather.

Ring Doorbell types

There are two primary Ring doorbell models:
Doorbells with batteries-These are battery-powered, making installation simple because there are no cables to worry about. There are times when they do need to be recharged, but it only takes a few hours, and the battery can last for up to six months at a time.

Wiring for doorbells-These need to be hooked into your home’s electrical system because they lack batteries. While this makes installation more difficult, the performance is superior to battery-powered doorbells.

What is Jumper Cable?

In the broadest sense, a jumper cable transfers power from one source to another. It’s possible that you’ve used a jumper cord to jump-start a car:

Here, a jumper cable will send energy—that is, electrical power—from one car’s battery (or from a portable charging unit) to another automobile, one with a flat battery. Other vehicles that employ jumper cables include tractors, railroads, and vans.

Beyond these large-scale applications, a jumper cable can also be utilized for more modest tasks, such as wiring a doorbell for a house.

Read- How to get the ring doorbell cover off?

Ring Doorbell Without Jumper Cable

Most people don’t know that you can actually ring a doorbell without using a jumper cable. It’s actually quite simple to do. All you need is a regular doorbell and a power source (like a battery).

Just connect the positive terminal of the power source to the positive terminal of the doorbell, and then touch the negative terminal of the power source to the negative terminal of the doorbell. That’s it! The doorbell will now ring without needing any electricity from your home.

This can be useful in many situations. For example, if your power goes out and you need to let someone know that you’re home, you can just use your car battery to ring the doorbell. Or, if you’re at a friend’s house and they don’t have a Doorbell, you can use this trick to “borrow” their Doorbell for a few seconds. There are endless possibilities! Just make sure that you disconnect the terminals when you’re done so that you don’t accidentally drain your battery or damage your Doorbell.

Do I Need Jumper Cable for Ring Doorbell


Do You Have to Use Jumper Cable to Ring Doorbell?

If your Ring Doorbell isn’t working, one of the first things you can try is resetting it. This can be done by removing the battery and then reinserting it after a few seconds. If that doesn’t work, you may need to use jumper cables to power the device.

Jumper cables are thin wires that are used to connect two devices together in order to share power. In this case, you would use them to connect the Ring Doorbell to another power source, like a car battery. This can be helpful if there’s an issue with your home’s power supply or if the doorbell’s battery is completely dead and needs a boost.

To use jumper cables, start by making sure both devices are turned off. Then, identify the positive and negative terminals on each device. The positive terminal will usually be marked with a plus sign (+), while the negative terminal will usually be marked with a minus sign (-).

Once you have these located, attach one end of the red jumper cable to the positive terminal on the Ring Doorbell and the other end of the red cable to the positive terminal on the other power source. Next, do the same thing with the black jumper cable and the negative terminals on each device. Finally, turn on both devices and check to see if the doorbell is working properly again.

How Do You Install a Ring Doorbell Jumper Cable?

If you’ve ever had trouble connecting your Ring Doorbell to the internet, you may need to install a jumper cable. While it may sound complicated, it’s actually a pretty simple process. Here’s what you need to know about installing a Ring Doorbell jumper cable.

First, you’ll need to purchase a jumper cable kit from Ring. This kit includes everything you need to get started, including the cable and instructions. Once you have the kit, simply follow the instructions to connect the cable from your router to the doorbell.

It’s important to note that not all routers are compatible with the Ring Doorbell jumper cable. If your router is not listed on the compatibility list, you may not be able to use this method to connect your doorbell. However, there are other ways to connect your Ring Doorbell if this method doesn’t work for you.

Once you’ve successfully installed the jumper cable, your Ring Doorbell should be able to connect to the internet and work properly. If you still have trouble installing the jumper cable, contact Ring customer support for more help.


If you have a Ring Doorbell, you may be wondering if you need to use jumper cables. The answer is yes! Jumper cables are necessary to connect your Ring Doorbell to your home’s wiring.

Without jumper cables, your Ring Doorbell will not work correctly.

Leave a Comment